LEGENDplex™ Human Immunoglobulin Isotyping Panel (6-plex) with V-bottom Plate

Pricing & Availability
Regulatory Status
RUO
Other Names
IgG1, IgG2, IgG3, IgG4, IgA, IgM
Ave. Rating
Submit a Review
Product Citations
publications
Cat # Size Price Save
740640 100 tests ¥232,540
Description

The LEGENDplex™ Human Immunoglobulin Isotyping Panel (6-plex) is a bead-based multiplex assay panel, using fluorescence-encoded beads suitable for use on various flow cytometers. It allows for the simultaneous quantification of 6 human immunoglobulins, including IgG1, IgG2, IgG3, IgG4, IgA, and IgM. This assay panel provides higher detection sensitivity and broader dynamic range than traditional ELISA methods. The panel has been validated for use on cell culture supernatant, serum, and plasma samples.

The LEGENDplex™ Human Immunoglobulin Isotyping Panels are configured as shown below:
 

Catalog No.

Plex Size

Targets

Recommended Sample Type

Recommended Dilution Factor

740637 740638

8-plex

IgG1, IgG2, IgG3, IgE, IgG4, IgA, IgM, IgD

Tissue culture

Varies

740639

740640

6-plex

IgG1, IgG2, IgG3, IgG4, IgA, IgM

Serum, Plasma

100,000

740714

740715

4-plex

IgG1, IgG2, IgG3, IgG4

Serum, Plasma

100,000

740641

740642

1-plex

IgE

Serum, Plasma

100

740643

740644

1-plex

IgD

Serum, Plasma

5,000


The LEGENDplex™ Human Immunoglobulin Isotyping Panel is designed to allow flexible customization within the panel. Please visit www.biolegend.com/legendplex for more information on how to mix and match within the panel.

This assay is for research use only.

Product Details
View current Manual (pdf)

Kit Contents

Kit Contents
  • Setup Beads: PE Beads 
  • Setup Beads: Raw Beads 
  • Capture Beads
  • Detection Antibody 
  • Standard Cocktail, Lyophilized 
  • SA-PE 
  • Assay Buffer 
  • Wash Buffer 
  • V-bottom Plate 
  • Plate Sealers 

Product Details

Verified Reactivity
Human
Application

Multiplex


Learn more about LEGENDplex™ at biolegend.com/legendplex

Download the LEGENDplex™ software here.
Product Citations
  1. van Heerden D, et al. 2021. Int J Mol Sci. 22:. PubMed
Materials Not Included
  • Flow Cytometer
  • Pipettes and Tips
  • Reagent Reservoirs for Multichannel Pipettes
  • Polypropylene Microfuge Tubes
  • Vortex Mixer
  • Sonicator
  • Aluminum Foil
  • Absorbent Pads
  • Plate Shaker
  • Centrifuges
  • Vacuum Filtration Unit and a Vacuum Source (if using filter plates)

Antigen Details

Biology Area
Immunology
Gene ID
NA

Related FAQs

If I don't have a vacuum, how do I remove the liquid from my plate?

If you do not have a vacuum, the assay should be run in a V-bottom plate. After centrifugation using a swinging-bucket rotor with a plate adaptor, you can remove the liquid by flicking the plate quickly, dumping the contents into a sink, and patting it dry carefully on a stack of clean paper towels without losing the beads. Alternatively, you can remove the liquid by using a pipette.

Should I perform the assay with the filter plates or with V-bottom plates?

Filter plates or V-bottom plates have been included in some kits for your convenience. A vacuum filtration unit is required to work with the filter plates. However, if you don’t have access to a vacuum manifold or if you prefer, then you can use the V-bottom plates and follow the recommended assay protocols for the type of plates you choose. All plates should be made from low binding polypropylene. Polystyrene ELISA or cell culture plates should not be used.

After I finish the staining process, how long can I wait before reading my LEGENDplex™ samples?

The samples can be kept overnight at 4°C while being protected from exposure to light and be read the next day. There may be a decrease in signal, but overall, the assay results should not be affected. Storing the samples for extended periods of time is not recommended, as it could lead to further reductions in signal.

What is the shelf life of LEGENDplex™ kits?

LEGENDplex™ kits are guaranteed for 6 months from the date of receipt, but may have a shelf life of up to 2 years from the date of manufacture.

Is special software required for data analysis?

Typically flow cytometers generate output files in FCS format (e.g. FCS 2.0, 3.0, or 3.1) and in some cases in list mode file format (LMD). Other software may be available to analyze FCS files. Data generated using LEGENDplex™ kits can be analyzed using the freely available LEGENDplex™ data analysis software. Please check our website for the most updated versions of the software.

Go To Top Version: 4    Revision Date: 06/23/2023

For Research Use Only. Not for diagnostic or therapeutic use.

 

This product is supplied subject to the terms and conditions, including the limited license, located at www.biolegend.com/terms) ("Terms") and may be used only as provided in the Terms. Without limiting the foregoing, BioLegend products may not be used for any Commercial Purpose as defined in the Terms, resold in any form, used in manufacturing, or reverse engineered, sequenced, or otherwise studied or used to learn its design or composition without express written approval of BioLegend. Regardless of the information given in this document, user is solely responsible for determining any license requirements necessary for user’s intended use and assumes all risk and liability arising from use of the product. BioLegend is not responsible for patent infringement or any other risks or liabilities whatsoever resulting from the use of its products.

 

BioLegend, the BioLegend logo, and all other trademarks are property of BioLegend, Inc. or their respective owners, and all rights are reserved.

 

8999 BioLegend Way, San Diego, CA 92121 www.biolegend.com
Toll-Free Phone: 1-877-Bio-Legend (246-5343) Phone: (858) 768-5800 Fax: (877) 455-9587

ProductsHere

Login / Register
Remember me
Forgot your password? Reset password?
Create an Account